I’ve been adding quite a few of these box cards to my silhouette shop recently. They aren’t hard to put together but there are a few steps. Each of my boxes are different so you will need to make adjustments to this tutorial based on the type of box you have purchased.

A couple of notes about these boxes. They aren’t true boxes in that they do not have a bottom. Once you have put them together, you should be able to fold them flat. Some of the boxes come with flaps along the edges (like the whale box) and some come without (like the ice cream box).

Here’s how to put it together:

1. Cut out the svg files. Glue accent pieces to the outside of the box. Note that most of these boxes should have a large accent piece on the back of the box AND the inside of the box. Usually you just need to cut the piece twice but on some of the designs the inside is different than the accent piece on the outside.

2. Glue the flap on the main piece to the back of the box to create the main box.

It should look like this:

3. Glue on all the accent pieces to the inside pieces (for example, the whale on the back piece shown here). Then fold on glue flap forward and one glue flap backwards.

4. Next glue the flaps into the box. Space the different pieces inside evenly. Most of these boxes come with 2-3 inside pieces. You can also fold the box flap to glue down the box pieces. Some of the boxes come with a single inside piece and a couple of little accessories (usually an object on a stick) that you just glue directly to the box.

And that’s it! It’s a cute card or fun gift idea!

Hope you have fun making these!

Carina

There are lots of weddings happening around me, and I was inspired to make some cake! Some Silhouette Cake of course!

These layered cakes are all put together about the same way (with some slight deviations based on design). You can mix and match the designs (like using the butterflies with the scallop shapes of the flowers) because all of the cakes are made exactly the same size.

The crazy thing is that these are even cuter in real life! I think we might have to leave these out in the office for a while to enjoy them!

Check the bottom of the post for links to specific designs you can find in my Silhouette Shop!

Here’s how you put these sweet treats together:

1. Cut out all the svg files.

2. Layer with adhesive (or pop dots as shown in my picture) the bottom mats with the small one on top of the larger one.

3. Put together the main form of the “cake” by gluing the boxes together. Put adhesive on the glue flaps to form the sides of the box.

4. Place the matching “top” to the box and glue down the sides.

You should have three (or more) boxes finished.

5. Glue the boxes to the mats in order of largest to smallest.

6. Finally, embellish the cake the the decorative items that come with the cake. I like a diagonal design but you can place them any way you want! For the topper, I try to use the biggest item (like the cut out butterfly) or gather together several of the same items (like 4 flowers all together). I used embellishments (like little diamonds or pearls to help accessorize).

And that’s it! You’ve made a darling layered cake! Hope you had fun making it!

Carina

(Links available as the product becomes available)

This week among my Silhouette releases are mobiles. They do take some time to put together but they are really cute and make the cutest party and home decor items!

I use a lot of solid papers for this project and was loving my hot glue gun because it made putting it altogether quick. The “umbrella” piece at the top can be used for more than just the mobile (size down for umbrella drinks or other party items).

Here’s how to put this together:

1. Cut out the pieces as shown in the file.

2. Glue all the accent pieces to the top of the “umbrella”. (Note you can do this between Steps 4 and 5 as I show in the photos as well.)

3. Fold on the scorelines of the “umbrella” and place a ribbon with a knot on the end of it in the center hole. If you want to place hanging icons from the center ribbon, leave a long tail.

4. Glue the flap of the “umbrella” together with the ribbon in the center.

5. Put together the “object” you will be placing on the mobile. For example, if you have the teddy bears, assemble each teddy bear individually. If you have the floral mobile, you can finger press the petals and make each flower individually. For my mobiles, I had 4 ribbons—the center ribbon, and three shorter ribbons. On each of the short ribbons, I hung two objects each. For the center, I hung 3 objects. So that is a total of  9 objects, right? But you have to DOUBLE that number, because you will want to make each object DOUBLE-SIDED since they will be floating. So I cut out 18 objects in total for each of my mobiles. Feel free to change up the number and size of your objects. (e.g. the scallop frame mobile only uses 3 frames so I only cut out 6 pieces in total).

If you left a long tail for the center ribbon, you can add you objects directly to that center ribbon. If you did not, you can always easily knot another piece of ribbon to the center knot. Place two or three objects on this center ribbon and space carefully. Glue one side of the object onto the ribbon first, then sandwich the ribbon by adding a second object.

6. Add the other ribbons with either tape or hot glue. Be sure to space them into thirds if you are using three more ribbons. Add objects to these ribbons as well.

And that’s it! It’s a lot of cutting and gluing but makes for an awesome project! Hope you have fun making these!

***NEW: Tutorial for putting together the airplane in the Airplane Mobile

I added this little tutorial because putting together the airplane (while not complicated) is a little hard to see in the photos. So here is how you put these together.

1. After cutting out all the pieces, you will want to add all the accent pieces as MIRROR IMAGES. Then fold the tail wings out. You can see that the tails on both cut out pieces are folded out to opposite sides. You need to put everything on as a mirror image so that you have accent pieces on BOTH sides of the airplane.

2. To place the planes on the ribbon, you will sandwich the ribbon between the two planes. Glue together the sides without the accent pieces.

3. You can add the wings at this point (with the ribbon sandwiched between the two planes) or you can do this before you add the plane to the ribbon.

Here’s a final look at the airplane from the top view.

Hopefully this helps you put together the airplane mobile!

Carina

PS. Other goings on at CGInc and ML : MiniLou Kickstarter Video, MiniLou Online Shop Opening, Release of my CartaBella line Circus Party

Links to my mobiles in the Silhouette Store

I know so many of my posts these days are Silhouette tutorials. I hope that they are so helpful for those of you that are “making” with your machines.

This cute little box is created with an “envelope” folding flap. Here’s how to put it together.

1. Cut out the silhouette files.  The main body of the box I cut out in white and the flap in kraft paper. The accent papers are in pink.

2.This box is double enforced—that is, I created it so that the sides of the box are stronger by doubling up the paper. So you have to fold all the score lines on the box and then glue down the extra flaps. Do this to all four flaps.

3. Then put glue on the glue flaps and attach the sides of the box together to finish the box.

4. To create the flap, glue down the accent pieces to the main flap. Be sure to match up the small, half circle notches on the accent paper and the flap.

5. Fold the flap around the box and attach using the notch. You can use a clear sticker or use the notch to hold the flap together.

And that’s it! There so many uses for this cute box from favor boxes, small gifts, or even as a card.

Happy creating!

Carina